Differences

This shows you the differences between two versions of the page.

--- public:i-700-abms-07-1:gola-instructions [2007/01/11 14:56] – created agusthl
+++ public:i-700-abms-07-1:gola-instructions [2024/04/29 13:33] (current) – external edit 127.0.0.1
@@ Line 1: / Line 1: @@
-http://www.cs.uu.nl/technical/services/ssh/putty/puttyfw.html
+====== Connecting ======
+===== Windows =====
+For those connecting to Gola from windows there is [[http://www.chiark.greenend.org.uk/~sgtatham/putty/|Putty]] (those using cygwin can use the Linux instructions).
+After opening Putty you enter "130.208.241.131" as the host name and "20222" as the port (make sure that ssh is the selected protocol).
+Then go to Connection -> SSH -> Tunnels.
+In source port enter "12000"\\
+In destination enter "<Gola-Name>:<Psyclone port>" where <Gola-Name> is the name of the machine you are going to run psyclone on (gola5 or gola6) and <Psyclone port> is the port psyclone is going to use on that machine.
+Then press the button "Add".
+After that go back to Session and save the session by giving it some name and pressing "Save".
+When all the settings are done press "Connect" and log in.
+If you can't log in make sure that the version of putty you are using is higher than 0.51.
+===== Linux =====
+"ssh -p 20222 -L 12000:<Gola-Name>:<Psyclone port> <user>@130.208.241.131"
+<Gola-Name> is the name of the machine you are going to run psyclone on (gola5 or gola6), <Psyclone port> is the port psyclone is going to use on that machine and <user> is your username on Gola.
+====== After connection has been made ======
+You are now located on the gola master. If it is your first time on Gola there are two things you have to do.
+  * Run "passwd" to set a password for your account you can remember
+  * Run "ln -s /opt/psyclone/psyclone/html" so that psyprobe can work properly
+This machine should not be used to run psyclone instead use "ssh <Gola-Name>", where <Gola-Name> is the Gola you opened a tunnel to when connecting.
+====== Starting psyclone ======
+Run "psyclone port=<Psyclone port>", where <Psyclone port> is the port you opened a tunnel to, in your homedirectory.
+====== Connecting to Psyprobe ======
+After psyclone as been started you can open a webbrowser on your machine and go to "localhost:12000" and should see psyprobe for the psyclone you just started.
-Betri leiðbeiningar koma eftir smá stund.